Description

This Practice describes the general fabrication, examination, inspection, testing, and documentation requirements for pressure vessels and shell-and-tube heat exchangers to be constructed in accordance with Section VIII, Division 1 {or 2} of the ASME Boiler and Pressure Vessel Code, henceforth referred to as the Code. This Practice describes the additional requirements for shell-and-tube heat exchangers to be constructed in accordance with TEMA Standards of the Tubular Exchanger Manufacturers Association.

This Practice is to be used in conjunction with design drawings or Data Sheets, and for project-specific design criteria that may supersede the requirements of this Practice but not take exception to the requirements of the Code. Total compliance with the Code, including stamping, shall be a basic requirement of all vessels ordered to this Practice. Unless otherwise specified in the purchase order or the drawings, all “U-” {U2-} stamped vessels shall be National Board (NB) registered.

Product Details

Published:

12/01/1998

File Size:

1 file , 150 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine

Description

This Practice provides design criteria and construction requirements for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.This Practice describes the design, fabrication, examination, inspection, testing, and documentation requirements for pressure vessels constructed in accordance with Code, Section VIII, Division 1 {or 2}.

Product Details

Published:

03/01/2012

Number of Pages:

48

File Size:

1 file , 440 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine

Description

This Practice describes the general design (by the Manufacturer), fabrication, examination, inspection, testing, and documentation requirements for pressure vessels to be constructed in accordance with Section VIII, Division 1 {or 2} of the ASME Boiler and Pressure Vessel Code, henceforth referred to as the Code.

This Practice is to be used in conjunction with design drawings and/or Data Sheets, and for project-specific design criteria that may supersede the requirements of this Practice but not take exception to the requirements of the Code

Product Details

Published:

05/01/2009

Number of Pages:

54

File Size:

1 file , 200 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine

Description

This Practice describes the general design (by the Manufacturer), fabrication, examination, inspection, testing, and documentation requirements for pressure vessels to be constructed in accordance with Section VIII, Division 1 {or 2} of the ASME Boiler and Pressure Vessel Code, henceforth referred to as the Code.

This Practice is to be used in conjunction with design drawings and/or Data Sheets, and for project-specific design criteria that may supersede the requirements of this Practice but not take exception to the requirements of the Code.

Product Details

Published:

02/01/2007

File Size:

1 file , 260 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine

Description

This Practice provides design criteria, fabrication, examination, inspection, testing, and documentation requirements for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.

Supplementary requirements for shell and tube heat exchangers are in PIP VESST002.

Product Details

Published:

01/01/2019

Number of Pages:

44

File Size:

1 file , 300 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine