Description

This Practice describes the materials, design, fabrication, inspection, testing, and documentation requirements for the construction of atmospheric and low-pressure, welded, shop- and field-fabricated dry bulk solids bins, hoppers, silos, and gravity blenders for various chemical facilities. These bulk solids bins, hoppers, silos, and blenders generally meet the philosophy and requirements of Section VIII, Division 1, of the ASME Boiler and Pressure Vessel Code, henceforth referred to as the Code; however, Code inspection and stamping are not required.

This Practice designates requirements for the design and construction of welded, cylindrical shell, single-wall vessels having internal design pressures not exceeding 15 psig and/or full vacuum external pressure at the top of the vessel in its normal operating position. Data sheet PIP VEDBI003 is required to define options covered herein and other specific requirements applicable to the particular vessel under consideration for service (startup, normal operation, upset, shutdown), location, maintenance, etc.

Product Details

Published:

07/01/2001

File Size:

1 file , 280 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine

Description

This Practice provides requirements for the construction of cylindrical atmospheric and low-pressure, welded, shop- and field-fabricated dry bulk solids containers (e.g., bins, hoppers, silos, and gravity blenders).

This Practice describes requirements for design, materials, fabrication, examination, testing, and shipping for cylindrical shell, single-wall containers for dry bulk solids (i.e., bins, hoppers, silos, and gravity blenders) having internal design pressures not exceeding 15 psig (103 kPa) and/or full vacuum external pressure at the top of the container in its normal operating position. Containers may be welded, shop- and field-fabricated, and shall generally be designed in accordance with the philosophy and requirements of the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, henceforth referred to as the Code. Code inspections and stamping are not required for these containers.

Product Details

Published:

05/01/2017

Number of Pages:

44

File Size:

1 file , 660 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine

Description

This Practice describes requirements for design, materials, fabrication, examination, testing, and shipping for cylindrical shell, single-wall containers for dry bulk solids (i.e., bins, hoppers, silos, and gravity blenders) having internal design pressures not exceeding 15 psig (103 kPa) and/or full vacuum external pressure at the top of the container in its normal operating position. Containers may be welded, shop- and field-fabricated, and shall generally be designed in accordance with the philosophy and requirements of the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, henceforth referred to as the Code. Code inspections and stamping are not required for these containers.

Product Details

Published:

06/01/2009

Number of Pages:

47

File Size:

1 file , 270 KB

Note:

This product is unavailable in Belarus, Russia, Ukraine